we’ve seen all the usual suspects. Below are the most common washing machine issues we fix every week:

Not spinning – This is often caused by a broken belt, motor fault, or door switch issue. LG and Samsung machines may flash error codes like UE (unbalanced load) or LE (motor lock error).

Not draining – If water is stuck in the drum, it could be a blocked hose or faulty drain pump. Bosch machines often show E18, while Samsung may display 5C or OE.

Leaking water – A cracked hose, damaged seal, or loose connection is usually the issue. LG machines can trigger the AE error when they detect a leak.

Too much vibration or shaking – This is often due to unbalanced loads or worn suspension. Some brands (like Samsung) display UB or DC error codes.

Weird noises during the cycle – Grinding, banging, or high-pitched whining sounds often point to issues with the bearings, motor, or drum. These faults may not always trigger an error code right away, but we see them often in older Bosch and Beko models.

Overfilling or underfilling with water – This could be a sensor or inlet valve fault. LG may display FE (overfill), while Samsung often uses 4E or nF for fill problems.

Won’t turn on – If your washer isn’t starting at all, it could be a door latch issue, control board fault, or blown fuse. Brands like Beko or Bosch may show E35 or E21 in some cases.

Bad smells or mouldy odour – This usually comes from detergent buildup, dirt, or mould inside the drum. We offer full internal cleans that eliminate odour and help prevent future build-up.

Flashing error codes or faulty display – Modern washers like LG, Samsung, Bosch and Miele often display codes like DE, FL, or E23. These help us diagnose problems faster and get your machine back in action.

Whether you’re in the inner suburbs or outer Melbourne, we service all major brands including LG, Samsung, Bosch, Miele, Beko, Asko, and more. Our technicians come to you with the right tools and parts to fix the problem properly. Disclaimer: In many cases, a single fault in your washing machine can trigger multiple error codes. Some error messages may appear due to related underlying issues, so diagnosing the root cause is essential for an accurate repair.

At Local Washing Machine Repairs, we proudly service all major washing machine brands across Melbourne and surrounding suburbs.
including:
Fisher & Paykel, Samsung, LG, Bosch, Electrolux, Miele, Westinghouse, AEG, Simpson, Haier, Hisense, Beko, Panasonic, Whirlpool, Asko, NEFF, Sharp, Daewoo, Eurotag, Devanti, CHiQ, Lemair, Euromaid, Artusi, ILVE, Omega, Ariston, Hoover, St George, Gaggenau, Maytag, Admiral, Candy, Bush, TCL, Speed Queen, Tisira, Kelvinator, AKAI, NEC, Menumaster, General Electric, Hobart, and more.

Whether you’ve got a front loader, top loader or washer-dryer combo, we got you covered. With years of hands-on experience and a strong focus on fast, same-day service, your washing machine is in good hands.

Most of the time, yep — getting your washing machine repaired is way cheaper than replacing it, especially if it’s just a small issue. As a general guide, if the repair’s going to cost less than half the price of a new washer, it’s usually worth fixing.

Not sure how much it’ll cost? Just give us a ring — we’ll give you a free quote over the phone, no strings attached.

Here’s what to keep in mind:

How old’s the machine? If it’s still fairly new or under warranty, it’s usually a no-brainer to fix it. But if it’s getting on (say 13-18 years old), it might be time to think about an upgrade.

What’s actually wrong with it? Things like blocked drains, broken belts or dodgy latches are quick and affordable to fix. But if it’s something bigger like the motor or control board, the cost can add up.

Parts and labour: We only use top-quality parts and back our work with a warranty, so you’re covered. And there’s no guesswork — our pricing is always upfront.

Is it breaking down a lot? If this isn’t the first time it’s played up, and you’re constantly calling for help, it might be cheaper in the long run to just get a new one — and we can help install that too.

At the end of the day, we’ll give you honest advice and help you figure out what makes the most sense for you.

If your washer’s not spinning, here are some common causes:

Lid or door switch: Most washers won’t spin if the door’s not shut properly. A faulty switch can stop the cycle altogether. Try cleaning it or call us if it needs replacing.

Worn drive belt: If the belt that drives the drum is loose or broken, the machine won’t spin. This usually needs a technician to replace it.

Motor issues: A faulty motor or wiring problem can stop the spin cycle. Best to get a pro to take a look.

Control board fault: If the control board isn’t sending the right signals, your washer might skip the spin. This also needs a proper diagnosis.

If you’ve tried the basics and it’s still not working, give us a call — our local Melbourne techs can sort it out fast.

When you’re searching for who can fix my washing machine near me, choose Local Washing Machine Repairs trusted by Melbourne homeowners for years. We bring expertise, transparent pricing, and reliable same-day repairs contact us today and we’ll get it sorted.